[Home]
help  contacts  suggestions  print  e-mail   save 
To use the advanced features of abf.com -> Logon | Register | Benefits
Online Tools
About ABF Services Coverage eCommerce Resource Center
  
Resource Center
Shipping Guide
Site Tips
Rules & Special Services
Index
Summary
Search ABF111
Fuel Surcharge
Software Downloads
Q-Manager
Q-Rate
ABF Holidays
More Online Tools...

Rules And Special Service Charges (ABF 111-AB )
Effective: 01/11/2010  | Inquiry: 3/13/2010

Item 995 : Weights - Gross Weights (Charges on Gross Weights)

(Subject to Note 4)

1. Charges shall be computed on gross weights, including any pallets or other shipping containers, but not including any temporary stowing components or materials that equate to 3% or less of the total weight of the shipment. The weight of such materials in excess of 3% of the total weight of the shipment will be charged for at the lowest rate applicable on any article in the shipment.

2. Subject to Notes 1, 2, and 3, when freight which moves on rates subject to a minimum weight of 20,000 pounds or more is prepared for shipment in conformity with packing requirements and, in addition, is loaded on pallets, with or without sides or ends, but without tops, no charge will be made for the transportation of the pallets, provided the shipper specifies the weight of the pallets on the bill of lading.

3. Any temporary stowing components or materials required for safe transportation of a shipment must be furnished and installed by the shipper. However, upon request, the materials may be furnished and/or installed by ABF subject to the following provisions:

A. Except for Secure Shipment Dividers (bulkheads), when materials are furnished by ABF, the cost thereof will be paid by the shipper upon presentation of an invoice from a supplier independent of ABF covering such materials used on the involved shipment.

Subject to Note 5, when Secure Shipment Dividers (bulkheads) are furnished by ABF, a Secure Shipment Divider (bulkhead) usage fee of $117.62 per divider will be assessed against the payer of the freight charges except this fee will not apply in connection with shipments moving under ABF U-PACK MOVING® service.

B. The labor charge for installation of any material, including Secure Shipment Dividers (bulkheads), will be $96.08 per hour, or fraction thereof, for each man.

Note 1 - When material, not a part of the pallet, is used to protect the top of the shipment or to help secure the load to the pallet, allowance will be made for the weight of the pallet but not for the additional material.

Note 2 - The weight of the pallets may not exceed 3% or 1,000 pounds, whichever is less, of the weight of that portion of the shipment loaded on such pallets. Any excess weight will be subject to the rates applicable to the commodity loaded on such pallets.

Note 3 - When the total weight of the shipment, less the weight of the pallets, is less than the minimum weight provided in connection with the applicable rate, charges will be assessed on the basis of the prescribed minimum weight.

Note 4 - The term "pallet" includes and is interchangeable with the terms "platform" and "skid."

Note 5 - Unless otherwise specifically provided in a TimeKeeper quote; or in Specific Account Pricing provisions in ABF 610, use of a Secure Shipment Divider (bulkhead) will negate any TimeKeeper service requested on the freight bill at time of shipment.

 
ABF 111-AB, Item 995

Weight Receipt, Certified (Item 993)
Weights - Overweight Fines and Related Expenses (Item 994)
All Rights Reserved | Terms of Use | Privacy Policy